What Is R-Value?
R-value is a measurement of how much a building material protects one side from the heat or cold on the other side. A higher R-value means that a material insulates better than one with a lower value.
In order to get an idea of what these values are, here are a few examples of common building materials and their R-values:
- 1/2″ drywall – 0.45
- 1/2″ plywood – 0.62
- 4″ wide brick – 0.80
- 1″ of concrete – 0.52
- Single pane of glass – 0.91
- 2″ insulated metal door – 2.00
R-Value of Building Insulation
Building insulation has different R-values depending on the type of material being used and the thickness of the material. Insulation made from different materials is used in different areas of a building, and is designed to be used in many types of construction.
Here are a few common types of building insulation:
Fiberglass – This is the most common material used in residential construction, and it is made up of blown glass threads that are either matted together into batts or distributed loosely. The fiberglass batts are either stuffed into the spaces between the studs in the exterior walls of a building, or they may be laid down on the bottom of an attic space. Other forms of fiberglass insulation, such as loose fill or boards, are used in other locations, such as a basement or crawl space. Fiberglass insulation comes in a wide range of R-values, most commonly from R-11 to R-38.
Foam – Spray foam insulation is made by mixing two chemicals (isocyanate and polyol resin, if you are interested) that react to create foam that expands to fill the space it is placed in. It can be shot into spaces through small access holes, making installation in retrofit projects easier than standard batts. There are two types of spray foam – open and closed cell – with closed cell being the most dense and therefore having a higher R-value. Foam averages R-5 to R-6 per inch, compared to R-2 to R-4 per inch of fiberglass.
Recycled denim – Blue jeans and other denim products are shredded and the cotton fibers are woven together to form batts, similar to standard fiberglass insulation. The denim used to produce this insulation is post-consumer, so it removes products from the waste stream and repurposes them. Denim batts provide slightly better R-values than similar thicknesses of fiberglass.
What Does It Mean?
So, why is all this important? R-value is an additive property, meaning that by layering several materials on top of one another, the insulating value of the assembly will be the sum of the individual products. For example, a wall made up of a sheet of drywall, R-11 insulation, and a sheet of plywood would have a total R-value of 12.07 (0.45 + 11.00 + 0.62). Think of it as adding multiple blankets of varying thicknesses and materials to keep warm.
There are a few more things to consider when determining how insulating a structure is, but for the most part, the higher R-value the building shell has, the easier it is to heat and cool and less energy is needed to keep it that way. Of course, there are things like doors and windows that don’t insulate as well or let in outside air, lowering the insulating ability of the building.
When designing a new structure or remodel project, it is important to try to increase the R-value of as much of the exterior walls, roof, and floor as possible. A well-insulated building is more energy efficient and less expensive to heat and cool.
Photos courtesy of Depositphotos.
